Finder Pompe Oil and Gas - API 610 and API 685

Finder Pompe - Oil and Gas - API 610 and API 685 - VS4 - V-PEP

The pumps belonging to the V-PEP series are API 610 compliant vertically suspended, single casing volute, line shaft driven VS4 type centrifugal sump pumps suitable for small capacity and medium to high head, ranging from less than 1 up to 35 m³/h capacity and up to 300 mt total head with a single impeller. Open impeller and concentric volute design substantially reduce radial and axial thrusts on shaft and bearings, regardless the operating capacity and suction pressure. In low ...

Finder Pompe - Oil and Gas - API 610 and API 685 - VS4 - HPV

API 610 vertically suspended, single casing volute, line shaft driven VS4 type, sump pump. Single piece shaft in standard construction. Line bearings available in different materials, depending on pumped fluid an operating conditions. Either oil or grease lubricated thurst bearing. Square or round plate, to match sump or tank plates or flanges. A wide installation list in critical processes attest to the HPV's remarkable performance and reliability DataSheet_HPV_2018 HPV_2019_R...

Finder Pompe - Oil and Gas - API 610 and API 685 - VS2-VS7 - C2KV

C2KV and C2KV-N pumps are double suction twin volute vertical wet pit pumps specifically designed for oil pipelines and petro-chemical applications. They are designed according to API 610, latest edition norms. Thanks to their specific construction, these pumps strongly reduce NPSHr value and the axial thrust value, thus increasing bearing life and pump reliability. All materials combination as per API 610 material tables plus erosion/corrosion resistant alloys are available Download...

Finder Pompe - Oil and Gas - API 610 and API 685 - VS1-VS6 - HPVT

HPVT are vertically-suspended, multi-stage centrifugal pumps designed and built in full accordance with API 610 norms. Available either in VS1 or VS6 configurations, depending on the characteristics of the pumped liquid and given conditions of service. Impellers are of centrifugal radial type, closed design with front and back wear rings and balancing holes to provide individual axial thrust balance (standard construction). Rotor axial positioning and support is granted through an oil...

Finder Pompe - Oil and Gas - API 610 and API 685 - VS1-VS6 - CKVN

CKVN - CKVN-B are vertically-suspended, single or multi-stage centrifugal pumps (VS1 or VS6 configuration), designed and built in full accordance with API 610 norms. Bowls are integrally cast diffuser type to assure optimum hydraulic efficiency and minimum radial thrust. A generously sized, carefully designed line shaft assures rotor stability and low vibration level.Rotor axial positioning and support is granted through an oil lubricated double row ball thrust bearing. A rigid coupli...

Finder Pompe - Oil and Gas - API 610 and API 685 - OH3 - L-PEP

L-PEP centrifugal process pumps are single stage overhung radially split casing (OH3 configuration) pumps, specifically conceived and designed for heavy duty applications in the oil and gas and petrochemical industry, in order to complete the Finder Pompe's HPP (API 610 heavy duty process pumps) range in the low flows/high head field, ranging from less than 1 up to 35 m³/h capacity and up to 300 mt total head with a single impeller . The special hydraulic design ...

Finder Pompe - Oil and Gas - API 610 and API 685 - OH3 - LHVN

LVN and LHVN are process pumps, single stage, vertical in-line overhung type, (OH3 and OH4 configurations), fully complying with API 610 Std. (ISO 13709), latest edition. The pump casings are radially split, with in-line nozzle arrangement. Larger sizes are designed with twin volute to minimize radial loads. The shaft has a stiff design, 1st lateral critical speed remains well above the operating speed of the pump. The axial thrust to the rotor is supported by oil lubricated ball beari...

Finder Pompe - Oil and Gas - API 610 and API 685 - OH3 - L-BPEP

The L-BPEP is a two stages overhung pump using two low flow design impellers in back to back configuration enclosed in a radially split. Nozzle arrangement available in several configurations. The L-BPEP meets API 610 11th ed. design criteria and maintains all the advantages given by the PEP solution such as no backflow and high stability at low flow conditions, low NPSHr without the use of inducers, use of API 682 standard mechanical seals, high reliabi...

Finder Pompe - Oil and Gas - API 610 and API 685 - OH2 - PEPMD

HPPMD and PEPMD pumps are designed and manufactured in full accordance with the API 685 (Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry, 1st edition October 2000) norms. Hydraulics are directly derived from the API 610 series (HPP and PEP) while magnetic couplings, containment devices and inner bearings have been designed to comply with the most stringent requirements of the guiding norms. The magnetic couplings are generously sized for the applied torqu...

Finder Pompe - Oil and Gas - API 610 and API 685 - OH2 - PEP

Radially split single stage centrifugal pumps having constructive features identical to the HPP line, with the exception of the open impeller. The specific construction allows the pump to run with no back-flow, with a totally stable curve and with very low NPSHr value.Specifically designed for petrochemical process plants and heavy duty applications whenever there is a need for low capacity and high head performances. They can also be used in any other fields whenever heavy and continu...

Finder Pompe - Oil and Gas - API 610 and API 685 - OH2 - HPPMD

Finder Pompe - Oil and Gas - API 610 and API 685 - OH2 - HPP

The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at 50 or 60 Hz., with temperatures ranging from -100°C to +400°C, these pumps provide very high reliability, high interchangeability, easy accessibility to the inner parts and minimum maintenance. The pump casings are radially split, centerline supported with end suction and top disc...

Finder Pompe - Oil and Gas - API 610 and API 685 - OH2 - DUAL PEP

Patented two stages overhung pump using two low flow design impellers in back to back configuration enclosed in a radially split, barrel shaped, centerline supported integral casing, maintaining the end - top nozzle configuration. Dual PEP pump meets API 610 11th ed. design and maintains all the advantages given by the PEP solution such as no backflow and high stability at low flow conditions, low NPSHr without the use of inducers, use of API 682 standard mechanical seals, high reliab...

Finder Pompe - Oil and Gas - API 610 and API 685 - HPMB

The HPMB line barrel pumps are multi-stage, designed and manufactured according to API 610, XI edition, and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry, for power plant boiler feed water, water injection, reverse osmosis. Designed to run at 50 or 60 Hz., with temperatures up to +400°C and pressures up to 220 bar, these pumps provide very high reliability, high interchangeability, easy accessibility to the inner parts and minimum ...

Finder Pompe - Oil and Gas - API 610 and API 685 - BB3 - HPM

HPM process pumps are two-stage, axially split, volute type pumps with single or double suction 1st stage impeller, fully designed according to latest edition of API 610 Std. Casing is axially split; suction and discharge nozzles are integrally cast with the lower half casing, while a crossover integrally cast with the upper half casing is used to deliver pumped fluid from the first set of stages to the other stages. Axial thrust is eliminated by back-to back configuration of the impe...

Finder Pompe - Oil and Gas - API 610 and API 685 - BB2 - HPD - HPE - HPE-DS

Single and two stage between bearing process pumps designed and manufactured according to API 610, 11th ed. HPD are single stage double suction radially split casing pumps.HPE are two stage pumps with either single or double suction first stage impeller, depending on the design capacity. Both series of pumps correspond to type BB2 as described in the reference standard.Compact design and generously sized components make these pumps suitable for the most critical applications: in the ...

Finder Pompe - Oil and Gas - API 610 and API 685 - BB1 - C2POH

C2PO heavy duty process pumps are horizontal, between bearings, with axially split casing, double suction, one stage impeller (BB1 configuration) , in full compliance with API 610 std., latest edition (ISO 13709). The specific pump construction allows to achieve very high efficiency with low NPSHr values. Robust casing, stiff shaft design and different bearing arrangements to meet specific applications make the C2PO a fully reliable pump, granting long life in service and reduced main...